Setup-storage: Difference between revisions
(minor fix) |
|||
(108 intermediate revisions by 9 users not shown) | |||
Line 1: | Line 1: | ||
As setup_harddisks is not portable due to its dependency on sfdisk and the lack of support for RAID and LVM, | == Introduction == | ||
As setup_harddisks is not portable due to its dependency on sfdisk and the lack of support for RAID and LVM, it has been re-implemented from scratch. As of FAI 3.2.8 it is integrated with mainline FAI, but not yet used by default. | |||
To test the current implementation, keep reading. There are some TODOs left and | |||
probably a lot more will arise as soon as people actually start testing it. Before you | |||
start, just let me clarify that this is a very dangerous piece of software that | |||
has not been sufficiently tested for any cases where you want to retain any of | |||
your data. It will definitely destroy any data on any of your disks in your | |||
system. You have been warned. | |||
If you're still interested, the following steps are required next: | |||
* get FAI 3.2.8 (or later) | |||
* add USE_SETUP_STORAGE=1 to one of your scripts in class/ | |||
* you may want to take a look at the SETUPSTORAGE class used in the simple example in FAI 3.2.8 and/or see [http://fai-project.org/doc/man/setup-storage.html man 8 setup-storage] | |||
* add lvm2 and mdadm to one of your client classes (it must be available on the target system, if you define LVMs/RAIDs in your disk_config) | |||
* create a disk_config for some class MY_TEST_CLASS from the old one apart from (at least) the following changes: | |||
** the filesystem is now given as the 4th column, the mount options are now in column 5 | |||
** there is no ;-hack anymore -- anything given after the mount options is passed on to mkfs.<filesystem> | |||
** Partitions are marked as bootable using the bootable:<nr> option in the disk_config line | |||
** The other things should at least work like they did before, but there are some new things as well, like RAID support (which is surely incomplete), LVM support, mounting by label or UUID. | |||
** '''Please take a look at the [[Setup-storage#Some_examples|attached examples]] to get an idea of the new format.''' | |||
** All details of the implemented syntax and examples are given below. | |||
* Give it a go (you have backed up all data, don't you?). There will be lots of debug output; if it finishes with the printout of an fstab file that is to your liking, it should have succeeded. | |||
Some further infos may also be found on [http://wiki.debian.org/DebianEdu/HowTo/FaiInstallDebianEdu wiki.debian.org]. | |||
== | == New configuration file syntax == | ||
In the following, we present a complete EBNF description of a modified configuration file syntax, as well as some examples. | In the following, we present a complete EBNF description of a modified configuration file syntax, as well as some examples. | ||
<pre> | <pre> | ||
file ::= <lines> EOF | file ::= <lines> EOF | ||
Line 21: | Line 41: | ||
comment ::= #.* | comment ::= #.* | ||
config ::= disk_config lvm | config ::= disk_config lvm( <lvmoption>)* | ||
| disk_config raid | | disk_config raid( <raidoption>)* | ||
| disk_config end | | disk_config end | ||
| disk_config disk[[:digit:]]+( <option>)* | | disk_config disk[[:digit:]]+( <option>)* | ||
Line 29: | Line 49: | ||
* path is assumed to be /dev/hda */ | * path is assumed to be /dev/hda */ | ||
| <volume> | | <volume> | ||
lvmoption ::= /* empty */ | |||
| preserve_always:[^/,\s\-]+-[^/,\s\-]+(,[^/,\s\-]+-[^/,\s\-]+)* | |||
/* preserve partitions -- always */ | |||
| preserve_reinstall:[^/,\s\-]+-[^/,\s\-]+(,[^/,\s\-]+-[^/,\s\-]+)* | |||
/* preserve partitions -- unless the system is installed for the | |||
first time */ | |||
| resize:[^/,\s\-]+-[^/,\s\-]+(,[^/,\s\-]+-[^/,\s\-]+)* | |||
/* attempt to resize partitions */ | |||
| fstabkey:(device|label|uuid) | |||
/* when creating the fstab, the key used for defining the device | |||
may be the device (/dev/xxx), a label given using -L, or the uuid | |||
*/ | |||
raidoption ::= /* empty */ | |||
| preserve_always:[[:digit:]]+(,[[:digit:]]+)* | |||
/* preserve partitions -- always */ | |||
| preserve_reinstall:[[:digit:]]+(,[[:digit:]]+)* | |||
/* preserve partitions -- unless the system is installed for the | |||
first time */ | |||
| fstabkey:(device|label|uuid) | |||
/* when creating the fstab, the key used for defining the device | |||
may be the device (/dev/xxx), a label given using -L, or the uuid | |||
*/ | |||
option ::= /* empty */ | option ::= /* empty */ | ||
| preserve:[[:digit:]]+(,[[:digit:]]+)* | | preserve_always:[[:digit:]]+(,[[:digit:]]+)* | ||
/* preserve partitions */ | /* preserve partitions -- always */ | ||
| disklabel:(msdos| | | preserve_reinstall:[[:digit:]]+(,[[:digit:]]+)* | ||
/* preserve partitions -- unless the system is installed for the | |||
first time */ | |||
| resize:[[:digit:]]+(,[[:digit:]]+)* | |||
/* attempt to resize partitions */ | |||
| disklabel:(msdos|gpt) | |||
/* write a disklabel - default is msdos */ | /* write a disklabel - default is msdos */ | ||
| bootable:[[:digit:]] | | bootable:[[:digit:]]+ | ||
/* mark a partition bootable, default is / */ | /* mark a partition bootable, default is / */ | ||
| virtual | | virtual | ||
/* do not assume the disk to be a physical device, use with xen */ | /* do not assume the disk to be a physical device, use with xen */ | ||
| fstabkey:(device|label|uuid) | |||
/* when creating the fstab, the key used for defining the device | |||
may be the device (/dev/xxx), a label given using -L, or the uuid | |||
*/ | |||
volume ::= <type> <mountpoint> <size> <filesystem> <mount_options> <fs_options> | volume ::= <type> <mountpoint> <size> <filesystem> <mount_options> <fs_options> | ||
Line 48: | Line 101: | ||
| logical | | logical | ||
/* for physical disks only */ | /* for physical disks only */ | ||
| raid[ | | raid[0156] | ||
/* raid level */ | /* raid level */ | ||
| [^/[:space:]]+-[^/[:space:]]+ | | [^/[:space:]]+-[^/[:space:]]+ | ||
Line 57: | Line 110: | ||
| swap | | swap | ||
/* swap space */ | /* swap space */ | ||
| /[^[:space:]]* | | /[^[:space:]]*(:encrypt)? | ||
/* fully qualified path */ | /* fully qualified path; if :encrypt is given, the partition | ||
* will be encrypted, the key is generated automatically */ | |||
name ::= [^/[:space:]]+ | name ::= [^/[:space:]]+ | ||
/* lvm volume group name */ | /* lvm volume group name */ | ||
size ::= [[:digit:]]+%?(-[[:digit:]]+%?)?(:resize)? | size ::= [[:digit:]]+[kMGTP%]?(-([[:digit:]]+[kMGTP%]?)?)?(:resize)? | ||
/* size in | /* size in kilo, mega (default), giga, tera or petabytes or %, | ||
* partitions or lvm logical volumes only */ | * possibly given as a range; physical | ||
| -[[:digit:]]+%?(:resize)? | * partitions or lvm logical volumes only; */ | ||
/* size in | | -[[:digit:]]+[kMGTP%]?(:resize)? | ||
/* size in kilo, mega (default), giga, tera or petabytes or %, | |||
* given as upper limit; physical partitions | |||
* or lvm logical volumes only */ | * or lvm logical volumes only */ | ||
| [^,:[:space:]]+(:(spare|missing))*(,[^,:[:space:]]+(:(spare|missing))*)* | | [^,:[:space:]]+(:(spare|missing))*(,[^,:[:space:]]+(:(spare|missing))*)* | ||
/* devices and options for a raid or lvm vg */ | /* devices and options for a raid or lvm vg */ | ||
Line 81: | Line 135: | ||
/* mkfs.xxx must exist */ | /* mkfs.xxx must exist */ | ||
fs_options ::= .* | fs_options ::= (createopts=".*"|tuneopts=".*")* | ||
/* options appended to mkfs.xxx | /* options to append to mkfs.xxx and to the filesystem-specific | ||
* tuning tool */ | |||
</pre> | |||
The major differences to the prior format: | |||
* the disk_config ... line allows for the keywords lvm and raid | |||
* options may need to be appended to the disk_config line | |||
* the ";" is not used anymore, the options that were given there have now been split up | |||
** the filesystem is now an explicit parameter; note, that the order of filesystem/mount-options is the same /etc/fstab, as opposed to the previous format of disk_config | |||
** any options to mkfs.xxx may be given using createopts="" | |||
** The "preserveX" and "boot" options are one of the options now given on the | |||
disk_config line, using preserve_reinstall or preserve_always and bootable. | |||
preserve_always is equivalent to the previous preserveX option, whereas | |||
preserve_reinstall preserves the partition unless "initial" is given as one of | |||
the FAI_FLAGS. | |||
* support for LVM and RAID is completely new :-) | |||
* resizing partitions is supported | |||
== Some examples == | |||
In fai 3.2.19 syntax has changed a little bit | |||
use: <pre> createopts="-O dir_index,resize_inode" instead of -O dir_index,resize_inode </pre> | |||
May be we can update the examples if the new syntax also works in debian stable I have not checked it. --Andreas 11:28, 25 April 2009 (CEST) | |||
<pre> | |||
# Configure the device /dev/hda | |||
disk_config hda preserve_always:6,7 disklabel:msdos bootable:3 | |||
# preserve the 6th and the 7th partition. The disklabel is msdos, which is the default | |||
# for x86. Furthermore the 3rd partition is made bootable. | |||
primary /boot 20-100 ext3 rw | |||
# create a primary partition /dev/hda1 with a size between 20 and 100 MB and mount it | |||
# read-write as /boot; it is formatted using ext3 filesystem | |||
primary swap 1000 swap sw | |||
# /dev/hda2 will be a swap space of 1000 MB | |||
primary / 12000 ext3 rw createopts="-b 2048" | |||
# /dev/hda3 should be formatted using ext3 filesystem; when calling mkfs.ext3 | |||
# the option "-b 2048" is appended. | |||
logical /tmp 1000 ext3 rw,nosuid | |||
# create the logical partition /dev/hda5 | |||
logical /usr 10000 ext3 rw | |||
logical /var 10%- ext3 rw | |||
# make /dev/hda7 at least 10% of the disk size | |||
logical /nobackup 0- xfs rw | |||
# use mkfs.xfs to format the partition | |||
</pre> | |||
<pre> | |||
# Configure the virtual device /dev/sda (for, e.g., Xen setups), all | |||
# partitions are primary and sizes are ignored (so one could as well specify | |||
# anything other than 0) | |||
disk_config sda virtual | |||
primary /boot 0 ext3 rw | |||
primary / 0 ext3 rw | |||
primary /tmp 0 ext3 rw | |||
primary /usr 0 ext3 rw | |||
primary /var 0 ext3 rw | |||
# resizing partitions is possible by appending :resize to any given size | |||
disk_config /dev/scsi/host0/bus0/target1/lun0 | |||
primary / 3000-6000:resize ext3 rw | |||
# resize to any value between 3000 and 6000 MB, as limited by the disk size, | |||
# the desired sizes of the other partitions, and the data on the partition | |||
primary /tmp 1000 ext3 rw | |||
</pre> | |||
<pre> | |||
# Create a softRAID | |||
disk_config raid | |||
raid1 / sda1,sdd1 ext2 rw,errors=remount-ro | |||
# create a RAID-1 on /dev/sda1 and /dev/sdd1, format using mkfs.ext2 and mount | |||
# it as / | |||
raid0 - disk2.2,sdc1,sde1:spare:missing ext2 default | |||
# create a RAID-0 on the second partition of the second disk, /dev/sdc1, and | |||
# /dev/sde1 as a spare partition, which (may?) me missing | |||
</pre> | |||
<pre> | |||
# Simple LVM example | |||
disk_config sda bootable:1 | |||
primary /boot 500 ext3 rw | |||
primary - 4096- - - | |||
disk_config lvm | |||
vg my_pv sda2 | |||
my_pv-_swap swap 2048 swap sw | |||
my_pv-_root / 2048 ext3 rw | |||
</pre> | |||
A pretty complex setup looks as follows: | |||
<pre> | |||
disk_config sda | |||
primary - 256 - - | |||
primary swap 1024 swap sw | |||
primary - 0- - - | |||
disk_config sdb | |||
primary - 0- - - | |||
disk_config sdc | |||
primary - 0- - - | |||
disk_config sdd | |||
primary - 256 - - | |||
primary - 1024 - - | |||
primary - 0- - - | |||
disk_config sde | |||
primary - 0- - - | |||
disk_config sdf | |||
primary - 0- - - | |||
disk_config raid | |||
raid1 / sda1,sdd1 ext2 rw,errors=remount-ro | |||
raid1 swap sda2,sdd2 swap rw | |||
raid1 - sda3,sdd3 ext2 default | |||
raid0 - sdb1,sde1 ext2 default | |||
raid0 - sdc1,sdf1 ext2 default | |||
# config the LVM | |||
disk_config lvm | |||
vg my_pv md2,md3 | |||
my_pv-_usr /usr 2048 ext3 rw -O dir_index,resize_inode | |||
my_pv-_var /var 600 ext3 rw -O dir_index,resize_inode | |||
my_pv-_e_h /export/home 10240 reiserfs rw,notail | |||
my_pv-_e_s /export/sites 2048 reiserfs rw,notail | |||
my_pv-_v /vservers 2048 ext3 rw | |||
</pre> | </pre> | ||
== Implementation == | |||
The current implementation still some TODOs left: | |||
=== Missing features and regressions === | |||
* Missing features | |||
** lazyformat -- will probably not be implemented as preserve_reinstall is much more stable. | |||
** some auto mode (something like auto:server, auto:desktop?) might be desirable | |||
** once everything is done, some checks should be performed, e.g., test that all partitions were created | |||
** Having /boot on a SW-RAID or LVM should be tested, I think it doesn't work - yes, it does indeed fail because $BOOT_* don't get set. No idea what the proper setting is -- use class GRUB_PC as shown in the simple example in experimental | |||
** implement disklabels other than msdos and gpt | |||
* Implementation details | |||
** preserve/resize deserve thorough testing, especially in case of LVM/RAID | |||
** The code of create_volume_group for the case of an existing vg should handle existing information and not rely on lvm commands to silently ignore existing volumes | |||
** mdadm --misc --zero-superblock /dev/hdx may be necessary | |||
** preserve must retain the flags (bootable, etc.) | |||
** the RAID commands are surely incomplete and lack any management of unanticipated situations | |||
** evaluate the return code of external commands in exec.pm -- currently only a warning is given | |||
** more error messages must be caught by exec.pm | |||
=== Documentation of internal data structures === | |||
The hash of all configurations specified in the disk_config file | |||
<pre> | |||
PHY_<DEVICE> | |||
virtual (0|1) | |||
disklabel STRING | |||
bootable -1..n | |||
partitions | |||
<1..n> | |||
size | |||
extended (0|1) | |||
preserve (0|1) | |||
resize (0|1) | |||
range | |||
eff_size | |||
number 1..n | |||
maps_to_existing 1..n | |||
start_byte | |||
end_byte | |||
mountpoint | |||
mount_options | |||
filesystem | |||
fs_options | |||
label | |||
VG_<NAME> | |||
devices | |||
estimated_size | |||
volumes | |||
<logical-volume-name> | |||
size | |||
preserve (0|1) | |||
resize (0|1) | |||
range | |||
eff_size | |||
mountpoint | |||
mount_options | |||
filesystem | |||
fs_options | |||
label | |||
RAID | |||
volumes | |||
<0..n> | |||
mode | |||
devices | |||
/dev/<device-name> | |||
options | |||
spare (0|1) | |||
missing (0|1) | |||
mountpoint | |||
mount_options | |||
filesystem | |||
fs_options | |||
label | |||
</pre> | |||
The current disk configuration | |||
<pre> | |||
<DEVICE> | |||
bios_cylinders | |||
bios_heads | |||
bios_sectors_per_track | |||
sector_size | |||
disklabel | |||
begin_byte | |||
end_byte | |||
partitions | |||
<1..n> | |||
begin_byte | |||
end_byte | |||
count_byte | |||
is_extended | |||
filesystem | |||
</pre> | |||
The current LVM configuration | |||
<pre> | |||
<VG> | |||
physical_volumes | |||
size | |||
volumes | |||
<lv-name> | |||
size | |||
</pre> | |||
The current RAID configuration | |||
<pre> | |||
<0..n> | |||
devices | |||
mode | |||
</pre> | |||
== Other implementations for RAID and LVM == | |||
Meanwhile you might also want to look at | |||
* [[User:Svamberg/Software RAID|Software RAID hook]] with mdadm | |||
* [[User:Gervai/Raid and LVM hook|SWRaid and LVM hook]] (with mdadm) | |||
* [http://www.linuxma.com/fai_raid/ LVM & RAID] | |||
== See also == | |||
* [http://fai-project.org/doc/man/setup-storage.html setup-storage manpage] | |||
[[Category:User Manual]] |
Latest revision as of 16:26, 21 July 2011
Introduction
As setup_harddisks is not portable due to its dependency on sfdisk and the lack of support for RAID and LVM, it has been re-implemented from scratch. As of FAI 3.2.8 it is integrated with mainline FAI, but not yet used by default.
To test the current implementation, keep reading. There are some TODOs left and probably a lot more will arise as soon as people actually start testing it. Before you start, just let me clarify that this is a very dangerous piece of software that has not been sufficiently tested for any cases where you want to retain any of your data. It will definitely destroy any data on any of your disks in your system. You have been warned.
If you're still interested, the following steps are required next:
- get FAI 3.2.8 (or later)
- add USE_SETUP_STORAGE=1 to one of your scripts in class/
- you may want to take a look at the SETUPSTORAGE class used in the simple example in FAI 3.2.8 and/or see man 8 setup-storage
- add lvm2 and mdadm to one of your client classes (it must be available on the target system, if you define LVMs/RAIDs in your disk_config)
- create a disk_config for some class MY_TEST_CLASS from the old one apart from (at least) the following changes:
- the filesystem is now given as the 4th column, the mount options are now in column 5
- there is no ;-hack anymore -- anything given after the mount options is passed on to mkfs.<filesystem>
- Partitions are marked as bootable using the bootable:<nr> option in the disk_config line
- The other things should at least work like they did before, but there are some new things as well, like RAID support (which is surely incomplete), LVM support, mounting by label or UUID.
- Please take a look at the attached examples to get an idea of the new format.
- All details of the implemented syntax and examples are given below.
- Give it a go (you have backed up all data, don't you?). There will be lots of debug output; if it finishes with the printout of an fstab file that is to your liking, it should have succeeded.
Some further infos may also be found on wiki.debian.org.
New configuration file syntax
In the following, we present a complete EBNF description of a modified configuration file syntax, as well as some examples.
file ::= <lines> EOF lines ::= EOL /* empty lines or whitespace only */ | <comment> EOL | <config> EOL comment ::= #.* config ::= disk_config lvm( <lvmoption>)* | disk_config raid( <raidoption>)* | disk_config end | disk_config disk[[:digit:]]+( <option>)* | disk_config [^[:space:]]+( <option>)* /* fully qualified device-path or short form, like hda, whereby full * path is assumed to be /dev/hda */ | <volume> lvmoption ::= /* empty */ | preserve_always:[^/,\s\-]+-[^/,\s\-]+(,[^/,\s\-]+-[^/,\s\-]+)* /* preserve partitions -- always */ | preserve_reinstall:[^/,\s\-]+-[^/,\s\-]+(,[^/,\s\-]+-[^/,\s\-]+)* /* preserve partitions -- unless the system is installed for the first time */ | resize:[^/,\s\-]+-[^/,\s\-]+(,[^/,\s\-]+-[^/,\s\-]+)* /* attempt to resize partitions */ | fstabkey:(device|label|uuid) /* when creating the fstab, the key used for defining the device may be the device (/dev/xxx), a label given using -L, or the uuid */ raidoption ::= /* empty */ | preserve_always:[[:digit:]]+(,[[:digit:]]+)* /* preserve partitions -- always */ | preserve_reinstall:[[:digit:]]+(,[[:digit:]]+)* /* preserve partitions -- unless the system is installed for the first time */ | fstabkey:(device|label|uuid) /* when creating the fstab, the key used for defining the device may be the device (/dev/xxx), a label given using -L, or the uuid */ option ::= /* empty */ | preserve_always:[[:digit:]]+(,[[:digit:]]+)* /* preserve partitions -- always */ | preserve_reinstall:[[:digit:]]+(,[[:digit:]]+)* /* preserve partitions -- unless the system is installed for the first time */ | resize:[[:digit:]]+(,[[:digit:]]+)* /* attempt to resize partitions */ | disklabel:(msdos|gpt) /* write a disklabel - default is msdos */ | bootable:[[:digit:]]+ /* mark a partition bootable, default is / */ | virtual /* do not assume the disk to be a physical device, use with xen */ | fstabkey:(device|label|uuid) /* when creating the fstab, the key used for defining the device may be the device (/dev/xxx), a label given using -L, or the uuid */ volume ::= <type> <mountpoint> <size> <filesystem> <mount_options> <fs_options> | vg <name> <size> /* lvm vg */ type ::= primary /* for physical disks only */ | logical /* for physical disks only */ | raid[0156] /* raid level */ | [^/[:space:]]+-[^/[:space:]]+ /* lvm logical volume: vg name and lv name*/ mountpoint ::= - /* do not mount */ | swap /* swap space */ | /[^[:space:]]*(:encrypt)? /* fully qualified path; if :encrypt is given, the partition * will be encrypted, the key is generated automatically */ name ::= [^/[:space:]]+ /* lvm volume group name */ size ::= [[:digit:]]+[kMGTP%]?(-([[:digit:]]+[kMGTP%]?)?)?(:resize)? /* size in kilo, mega (default), giga, tera or petabytes or %, * possibly given as a range; physical * partitions or lvm logical volumes only; */ | -[[:digit:]]+[kMGTP%]?(:resize)? /* size in kilo, mega (default), giga, tera or petabytes or %, * given as upper limit; physical partitions * or lvm logical volumes only */ | [^,:[:space:]]+(:(spare|missing))*(,[^,:[:space:]]+(:(spare|missing))*)* /* devices and options for a raid or lvm vg */ mount_options ::= [^[:space:]]+ filesystem ::= - | swap | [^[:space:]] /* mkfs.xxx must exist */ fs_options ::= (createopts=".*"|tuneopts=".*")* /* options to append to mkfs.xxx and to the filesystem-specific * tuning tool */
The major differences to the prior format:
- the disk_config ... line allows for the keywords lvm and raid
- options may need to be appended to the disk_config line
- the ";" is not used anymore, the options that were given there have now been split up
- the filesystem is now an explicit parameter; note, that the order of filesystem/mount-options is the same /etc/fstab, as opposed to the previous format of disk_config
- any options to mkfs.xxx may be given using createopts=""
- The "preserveX" and "boot" options are one of the options now given on the
disk_config line, using preserve_reinstall or preserve_always and bootable. preserve_always is equivalent to the previous preserveX option, whereas preserve_reinstall preserves the partition unless "initial" is given as one of the FAI_FLAGS.
- support for LVM and RAID is completely new :-)
- resizing partitions is supported
Some examples
In fai 3.2.19 syntax has changed a little bit
use:
createopts="-O dir_index,resize_inode" instead of -O dir_index,resize_inode
May be we can update the examples if the new syntax also works in debian stable I have not checked it. --Andreas 11:28, 25 April 2009 (CEST)
# Configure the device /dev/hda disk_config hda preserve_always:6,7 disklabel:msdos bootable:3 # preserve the 6th and the 7th partition. The disklabel is msdos, which is the default # for x86. Furthermore the 3rd partition is made bootable. primary /boot 20-100 ext3 rw # create a primary partition /dev/hda1 with a size between 20 and 100 MB and mount it # read-write as /boot; it is formatted using ext3 filesystem primary swap 1000 swap sw # /dev/hda2 will be a swap space of 1000 MB primary / 12000 ext3 rw createopts="-b 2048" # /dev/hda3 should be formatted using ext3 filesystem; when calling mkfs.ext3 # the option "-b 2048" is appended. logical /tmp 1000 ext3 rw,nosuid # create the logical partition /dev/hda5 logical /usr 10000 ext3 rw logical /var 10%- ext3 rw # make /dev/hda7 at least 10% of the disk size logical /nobackup 0- xfs rw # use mkfs.xfs to format the partition
# Configure the virtual device /dev/sda (for, e.g., Xen setups), all # partitions are primary and sizes are ignored (so one could as well specify # anything other than 0) disk_config sda virtual primary /boot 0 ext3 rw primary / 0 ext3 rw primary /tmp 0 ext3 rw primary /usr 0 ext3 rw primary /var 0 ext3 rw # resizing partitions is possible by appending :resize to any given size disk_config /dev/scsi/host0/bus0/target1/lun0 primary / 3000-6000:resize ext3 rw # resize to any value between 3000 and 6000 MB, as limited by the disk size, # the desired sizes of the other partitions, and the data on the partition primary /tmp 1000 ext3 rw
# Create a softRAID disk_config raid raid1 / sda1,sdd1 ext2 rw,errors=remount-ro # create a RAID-1 on /dev/sda1 and /dev/sdd1, format using mkfs.ext2 and mount # it as / raid0 - disk2.2,sdc1,sde1:spare:missing ext2 default # create a RAID-0 on the second partition of the second disk, /dev/sdc1, and # /dev/sde1 as a spare partition, which (may?) me missing
# Simple LVM example disk_config sda bootable:1 primary /boot 500 ext3 rw primary - 4096- - - disk_config lvm vg my_pv sda2 my_pv-_swap swap 2048 swap sw my_pv-_root / 2048 ext3 rw
A pretty complex setup looks as follows:
disk_config sda primary - 256 - - primary swap 1024 swap sw primary - 0- - - disk_config sdb primary - 0- - - disk_config sdc primary - 0- - - disk_config sdd primary - 256 - - primary - 1024 - - primary - 0- - - disk_config sde primary - 0- - - disk_config sdf primary - 0- - - disk_config raid raid1 / sda1,sdd1 ext2 rw,errors=remount-ro raid1 swap sda2,sdd2 swap rw raid1 - sda3,sdd3 ext2 default raid0 - sdb1,sde1 ext2 default raid0 - sdc1,sdf1 ext2 default # config the LVM disk_config lvm vg my_pv md2,md3 my_pv-_usr /usr 2048 ext3 rw -O dir_index,resize_inode my_pv-_var /var 600 ext3 rw -O dir_index,resize_inode my_pv-_e_h /export/home 10240 reiserfs rw,notail my_pv-_e_s /export/sites 2048 reiserfs rw,notail my_pv-_v /vservers 2048 ext3 rw
Implementation
The current implementation still some TODOs left:
Missing features and regressions
- Missing features
- lazyformat -- will probably not be implemented as preserve_reinstall is much more stable.
- some auto mode (something like auto:server, auto:desktop?) might be desirable
- once everything is done, some checks should be performed, e.g., test that all partitions were created
- Having /boot on a SW-RAID or LVM should be tested, I think it doesn't work - yes, it does indeed fail because $BOOT_* don't get set. No idea what the proper setting is -- use class GRUB_PC as shown in the simple example in experimental
- implement disklabels other than msdos and gpt
- Implementation details
- preserve/resize deserve thorough testing, especially in case of LVM/RAID
- The code of create_volume_group for the case of an existing vg should handle existing information and not rely on lvm commands to silently ignore existing volumes
- mdadm --misc --zero-superblock /dev/hdx may be necessary
- preserve must retain the flags (bootable, etc.)
- the RAID commands are surely incomplete and lack any management of unanticipated situations
- evaluate the return code of external commands in exec.pm -- currently only a warning is given
- more error messages must be caught by exec.pm
Documentation of internal data structures
The hash of all configurations specified in the disk_config file
PHY_<DEVICE> virtual (0|1) disklabel STRING bootable -1..n partitions <1..n> size extended (0|1) preserve (0|1) resize (0|1) range eff_size number 1..n maps_to_existing 1..n start_byte end_byte mountpoint mount_options filesystem fs_options label VG_<NAME> devices estimated_size volumes <logical-volume-name> size preserve (0|1) resize (0|1) range eff_size mountpoint mount_options filesystem fs_options label RAID volumes <0..n> mode devices /dev/<device-name> options spare (0|1) missing (0|1) mountpoint mount_options filesystem fs_options label
The current disk configuration
<DEVICE> bios_cylinders bios_heads bios_sectors_per_track sector_size disklabel begin_byte end_byte partitions <1..n> begin_byte end_byte count_byte is_extended filesystem
The current LVM configuration
<VG> physical_volumes size volumes <lv-name> size
The current RAID configuration
<0..n> devices mode
Other implementations for RAID and LVM
Meanwhile you might also want to look at
- Software RAID hook with mdadm
- SWRaid and LVM hook (with mdadm)
- LVM & RAID