FAQs for new users
I'm new to FAI. How should I start ?
- Read the FAI guide and this FAQ.
- Start with the simple examples by copying them to FAI_CONFIGDIR.
- Install the stable distribution on your first clients!
What's the official website for FAI?
Where do I find the FAI mailing list ?
There's info on mailing lists and archives in this Wiki: Linux-fai mailing list infos
sanso 10:30, 11 Aug 2005 (CEST)
There also is a section "Mailing list" on the FAI homepage at
http://www.informatik.uni-koeln.de/fai/ Please use your favorite search engine to search for your questions before posting to the list. Also don't post complete logs. Most times it's sufficient to describe the setup (which version of fai, which version of debian on the fai server and which version to be installed with fai) and to post the part of the log(s) where the error occurs. It's the first error that matters. Or provide logfiles on a webserver and post a link.
More technical stuff / troubleshooting
I try to install testing or sid/unstable and something goes wrong. Why?
testing and unstable sid change every day. So it's possible that your problems are solved today or tomorrow. You should try again. It's recommendable to use a local mirror and freeze it when you found a working install. But we also recommend to use stable and local backport repositories whenever possible.
As for sid - that's why it's called unstable You might want to get used to things braking.
You should only try to install
testing if You know what you're doing and
You know You definitely need something other than
sanso 10:20, 11 Aug 2005 (CEST)
What order are scripts executed in?
Scripts are executed in class definition order, and in numerical order within each class.
For example, if the classes FOO and BAR were defined (in that order), and
S30, the order of execution would be:
make-fai-nfsroot dies silently, Why?
Restarted it with more debug output (-v) and (-r) to recover yielded: Reading Package Lists...
E: Dynamic MMap ran out of room E: Error occured while processing phpgroupware- netsaint (NewPackage) E: Problem with MergeList /var/lib/apt/lists/172.25.1.52:9999 _debian_dists_unstable_main_binary-i386_Packages E: The package lists or status file could not be parsed or opened.
As I my default
/etc/apt/sources.list read in stable, testing and unstable, apt-get needs a lot
of space for its internal tables. Therefore I had also a special
apt.conf which is missing in the
nfsroot of FAI. This is a known problem of apt.
/etc/fai/sources.list, then minimised it to contain just one version (e.g. stable)
Why does the system reboot after entering ctrl-c following an installation?
The default actions for FAI do not allow you to get a shell since it is insecure and it will reboot on <ctrl-c> by design.
If you want to get a shell you need to change FAI's actions by adding 'createvt' to the FAI_FLAGS variable that is passed to the kernel on startup. You can do this via fai-chboot (e.g.
fai-chboot -iFv -k "FAI_ACTION=install" hostname) for network installs or for floppy installs you can use something similar to
Why can't I login via ssh to my install client(s) anymore? It used to work but suddenly stopped working.
After you have reinstalled FAI on your server a new ssh host key is
generated. This also happens when you call
Remove the relevant line from
~/.ssh.known_hosts and try again.
(The relevant lines are the ones containing the client's hostname and/or IP-address --sanso 10:32, 11 Aug 2005 (CEST))
How to do a headless install from floppy on my i386 pc?
So how do you install Debian on a stripped down, headless i386 pc, without network booting, from floppy? For a first time user, it was pretty hard. I spent half a day on this, but if I had known the following, the job could have been done in less than an hour. (Not including the actual installation of packages). I had to hook up my monitor once in a while to see what was happening. The following tips apply to FAI in sid (Debian unstable). 1. Initial setup, before stripping the client PC from unneeded hardware. 1.a. If you don't attach input devices: somewhere in your BIOS there should be a "Halt on <X>" setting to handle possible hardware problems on startup, not allowing your system to boot e.g. when no keyboard is connected. Set this to "Halt on No Errors" 1.b. If you want to work without a graphics adaptor: check if your motherboard allows to boot without a graphics card. Even with the "Halt on No Errors" setting, your mobo can refuse to boot without a graphics device. 1.c. In the BIOS, check if your boot sequence starts with the floppy ("A" in general) 1.d. Check that the floppy device you are planning to boot from, is connected to the END of the floppy cable to have it recognized as disk "A"
2. Configuration of FAI 2.a. Make sure to explicitly set the LOGSERVER variable in /etc/fai/fai.conf (and nfsroot/etc/fai.conf if you already issued "make-fai-nfsroot"), otherwise FAI will complain with a "SERVER not set" error and can't publish the install logs. (I think this is a bug) 2.b. Use "make-fai-bootfloppy" at least _twice_ to write the bootdisk. The system could not boot from the disk if it was written once. Also check the disk with "e2fsck -c /dev/fd0" to make sure. 2.c. The "faimond" feature didn't work. That's quite inconvenient but no showstopper. 3. After package installation 3.a. At the end of installation, for some reason the newly installed system thinks it should reboot using tftp, but it hangs. It waits for a user to press ENTER or CTRL-C. You can safely ignore this and reboot manually. 3.b. There is NO "fai" account on the newly installed system, and the default root password is "fai", not "roott" which is used in another part of the installation.