Multiple Network Interfaces Howto

From FAIWiki
Revision as of 08:23, 19 November 2009 by Bittner (talk | contribs) (→‎Related Discussions: + another thread)
Jump to navigation Jump to search

Motivation

You want to use FAI to install systems with two or more network interface cards (NIC).

Installing a client with two active interfaces usually causes trouble as the boot process hangs when ipconfig tries to set up the 'wrong' interface using DHCP when no DHCP server is present for the respective interface. Also, by default FAI sets up only one (i.e. the first) network interface dynamically with the following script of the FAIBASE class:

/var/lib/fai/config/scripts/FAIBASE/30-interface

Solution

Draft recommendation:

  • Set up DHCP for each network (card), otherwise the installation boot process will hang when ipconfig tries to set up all interfaces.
  • You should have one template /etc/network/interfaces for each class of machine, and then plug in the IP addresses for each machine via search and replace. Use cfagent for this.

Analysis, Troubleshooting

Boot process stops at ipconfig (client installation over network)
Check which MAC address ipconfig is trying to set up. Typically, the related interface is not connected to a network that provides a DHCP address for that network card.

Related Discussions