User:Asc

Hello,

I am Andreas.

---

These are some ideas if you think they need a other location feel free to move. But leave a short message that I can remove it here.

---

I have found a intresting thing for using RAID with setup storage.

Also a RAID 1 with one drive is allowed with setupstorage.

disk_config disk1 bootable:1

primary  -              50     -        -
logical  -              800    -        -
logical  -              3000-  -        -

disk_config raid
raid1        /boot   disk1.1            ext2        rw,errors=remount-ro
raid1        swap    disk1.5            swap        sw
raid1        /       disk1.6            ext3        rw

After installation you can expand it with:

mdadm --grow -n 2 

to a real raid. Then you must rebuild it like one disk has failed.

---

This use of softupdate may be used if you install from fai-cd and your space is limit. After installing a base host you can softupdate from a fai server. Also for some other cases this may be a good solution.

class/51-host-add-softupdate-classes

#! /bin/bash
# set -xv
# For debugging add classes in /var/lib/fai/FAI_CLASSES

if [ "$action" = "softupdate" ] ; then
  (ifclass DEMO) || echo "DEMO"
fi

exit 0